Ethernet TCP/IP
- Supports any serial devices with seven or eight data requiring Ethernet access
- Compact size for internal installation in 720i™, 820i® and 920i® indicators
- Can be used in other applications requiring five-volt power supplied
- 10/100 megabyte through RJ-45 connector or wireless option
- HTTP, serial, telnet and SNMP management
- Descripción
Descripción
Supported Protocols:
ARP, UDP, TCP, Telnet, SNMP, ICMP, HTTP, BOOTP, DHCP, and TFTP
Compatibility:
Ethernet: Version 2.0/IEEE 802.3
Network Interface:
Ethernet: RJ-45 (10/100 Base-T) or AUI
(transformer and resistors/capacitors required)
Serial Interface:
1 serial interface
Reset line:
RxD/TxD
RTS/CTS/DCD
DTR line (for disconnect)
Three status lines (for LEDs)
Data Rates:
300 bps to 115.2 Kbps
Serial Line Formats:
Characters: seven or eight data bits
Stop bits: one or two
Parity: odd, even, none
Modem Controls:
DTR (TTL level)
Flow Control:
XON/XOFF
CTS/RTS
None
Management:
SNMP (read only)
Serial login, Telnet login
Diagnostic LEDs:
TX/RX Data
Good Link
Status
Diagnostics
Power Requirements:
5 V regulated
250 mA (Ethernet model)
Operating Temperature:
41°F to 122°F (5°C to 50°C)
