
EtherNet/IP® Protocol Card
- Industrial Protocol for AB PLC
- IP address settings configurable with on-board DIP switched, Web page, or ARP or DHCP
- Supports Rockwell Automation® EtherNet/IP level
- CE marked and UL conformance
- Onboard diagnostic LED control protocols
- Supports the Modbus/TCP protocol and conforms to Modbus/TCP specification 1.0
- EtherNet/IP for AB PLC Specifications
- EtherNet/IP Protocol Card for AB PLC Specifications
Dimensions:
2 x 1.9 x 0.75 in
(151.8 x 48 x 19.1 mm)
Power Requirements:
3.15-3.45 VDC
Operating Temperature:
-40°F to 176°F (-40°C to 85°C)
Relative Humidity:
5-95% non condensation
Address Range:
Full IP address range
Physical Specifications:
Length: 2.13 in (86 mm)
Width: 3.38 in (54 mm)
Height: 0.59 in (15 mm)
Power Requirements:
+5 VDC ± 5%, powered by indicator
Power Consumption:
350 mA on the 5 V power connection
Operating Temperature:
14°F to 158°F (-10°C to 70°C)
Non-Operating Temperature:
-13°F to 185°F (-25°C to 85°C)
Relative Humidity:
5 – 95% non-condensing
Diagnostic Leds:
Link status, module status, network status, activity
Field Bus Interface:
RJ- 45