Sola MCR Series AC Power Regulators
- UL listed, CSA certified
- Automatic overload protection
- Convenient lighted on/off switches
- Available in 70, 150 and 250VA outputs
- Offered in standard 120 volt, 60Hz models
- Two duplex receptacles allow several pieces of equipment to economically share the same source of regulated power
- Descripción
Descripción
Input:
Voltage: 120 V
Input Voltage Range: +10% to -20% of input nominal voltage
Control: Lighted Enable Switch Output:
Voltage: 120 V
Voltage Regulation: ±3% for an input line variation of +10% to -20%. Output will remain within NEMA voltage specifications for input voltages as low as 65% of nominal. No loss of output for line loss of 3 milliseconds.
Harmonic Distortion: Less than 3% total RMS content at full load
Noise Reduction:
Common mode noise rejection exceeds 120 dB (DC to 1 MHz). Transverse mode noise rejection exceeds 60 dB (10 KHz to 1 MHz)
Protection:
Input: Surge suppression module
Output: Surge suppression module and ferroresonant technology suppresses ANSI/IEEE C62.41-1980 Class A and B waveforms to safe levels (formerly IEEE 587-1980)
Efficiency:
90% at full load (typical)
Reliability:
25-year continuous life, average
Operating Temperature:
-4°F to 122°F (-20°C to 50°C)
Construction:
Cruciform-type construction with precision die-cut shunts, gaps, and spacing between windings
Approvals:
UL listed to UL1012; CSA certified to CSA C22.2-66
Dimensions:
(W x H x D) 6.75 x 6.25 x 9.25 in (171.5 x 158.8 x 235.0 mm)
Weight:
70 VA – Approximately 16 lb (7.3 kg)
150 VA – Approximately 21 lb (9.5 kg)
250 VA – Approximately 26 lb (11.8 kg)
Warranty:
One-year limited warranty
