UPC5000/UPC5010 Pressure Calibration Standard
- Available in self-contained enclosure with carrying handles (UPC5000) or 19 inch wide rack-mountable version (UPC5010)
- Six sets of ranges to choose from: 2,000/1,000/400 psi, 1,000/500/200 psi, 500/250/100 psi, 100/50/20 psi, 50/25/10 psi and 15/7.5/3 psi
- Three independent selectable ranges in each instrument
- ±0.05% F.S. accuracy of each independent selectable range
- Available with Light Emitting Diode (LED) or Liquid Crystal Display (LCD)
- Pressure display resolution 0.02% F.S. typical for each range
- State-of-the-art push button calibration – No analog potentiometers or adjustments required
- Lightweight, less than 33 pounds
- Adjustable overpressure protection
- Precision pressure vernier control
- Self-contained 2,215 psi nitrogen cylinder
- Voltage/current display mode for transducer testing
- Supplies DC loop power
- Non-destructible, finger tip control micrometering valves for pressure control
- Quick-disconnect fitting and hose included
- Different technicians can calibrate the same Device-Under-Test and get identical results
- Calibration Certificate included; traceable to the National Institute of Standards and Technology (NIST)
- Pneumatic only; no hydraulic fluid or distilled water messes
- Descripción
Descripción
Combining heavy-duty construction and precision performance, the UPC5000 offers flexibility for a variety of pressure calibrating applications.
The compact UPC5000 includes a self-contained nitrogen cylinder, our patented Orion 2C valve and rechargeable battery, as well as all controls, hoses and connections required for rapid on-site calibration. A weight of less than 33 pounds makes this instrument truly portable. Whether your destination is a mountain-side wellhead transmitter or your own standards lab, this system provides industry-leading convenience for calibrating transmitters, transducers, gauges and other pressure sensitive devices.
Each UPC5000 series model is equipped with an exclusive precision vernier that provides infinite control to secure the most accurate readings possible. Three independent selectable ranges provide accuracy within 0.05% up to 2,000 psi. Readings appear on a large, digital LED display, eliminating parallax, interpolation and operator error. Increased protection is provided by a self-relieving regulator that eliminates costly repairs due to inadvertent pressure overshooting. The UPC5000 is easy to operate and training can be accomplished in as little as 10 minutes. Different technicians can calibrate the same transmitter and get identical results—every time.
Whether working in the oil and gas industry, metrology, power generation industry or other pressure-related industries, the UPC5000 performs beyond the standard for accurate, on-site calibration.
Applications
- Engine test
- Food processing
- Pneumatic system checks
- Aircraft manufacturing, government laboratories, oil industry, electric power plants (nuclear and fossil), and general industry
Condec UPC5000/UPC5010 Specifications
Available Calibration Modes:
Gauge, absolute or gauge and absolute
Overall accuracy:
±0.05% F.S. maximum. Accuracy statement includes all effects of linearity, hysteresis, repeatability and ambient temperature.
Power:
115 or 230 VAC 50/60 Hz and 12 volt, rechargeable internal, sealed lead acid battery, standard
Temperature Range:
Operating: 40°F to 140°F (4°C to 60°C)
Storage: 0°F to 185°F (-17°C to 85°C)
Relative humidity: 95%, non-condensing
Pressure Media:
Clean dry gaseous nitrogen, standard
Internal pressure cylinder:
Capacity: 7.0 standard cubic feet
Volume: 80 cubic inches
Rating: 2215 psi
Pressure supply gauge: Size: Two-inch diameter
Range: 0-3000 psig
Overpressure Rupture Disc:
Rating: 3000 psig, nominal
Material: Stainless steel outer case
Pressure Media Filter:
Rating: 7 microns, nominal
Type: Field replaceable filter cartridge
Control Valves:
Type: Micro-metering with positive shut off, adjustable stop and replaceable seat, non-destructible
Material: Aluminum/stainless steel
Internal piping:
Tubing: 1/8 in. O.D., 0.028 in. wall thickness, copper, seamless
Couplings: Brass Swagelok®
Fill and Test Ports:
Style: Quick-disconnect type
Fill Port Pressure Rating: 3000 psig connected, 2000
psig disconnected
Test Port Pressure Rating: 5000 psig
Pressure Hoses:
Quantity supplied: Two; one input and one output
Length: 5 feet, nominal
Vernier Control:
Volume: 0.25 cubic inches
Vernier Mechanical Rotation: 16 turns, nominal
Adjustable Sensitivity: 0.0005 psi, minimum
Material: Aluminum/stainless steel
Pressure Limit Monitor Gauge:
Size: Two-inch diameter
Range: As appropriate for UPC5000/UPC5010 model range utilized
Pressure Limit Control:
Pressure Rating: 3000 psig maximum (inlet)
Output Pressure Range: As appropriate for UPC5000/UPC5010 model range utilized
Construction: Self-relieving, single stage regulator
Internal Pressure Sensor:
Type: Bonded, metal foil strain gauge or equal
Sensitivity: 3 mV/V, nominal
Construction: Completely weld sealed stainless steel outer body and pressure cavity
UPC5000 External Carrying Case:
Type: Aluminum case with cover and carrying handle
Material thickness: 0.090 in. nominal
Finish: Grey polyurethane baked-enamel paint, textured finish
Current Display:
0-20.000 mA counting by 0.005 mA
Weight:
UPC5000: Less than 33 lb (14.9 kg) including all hoses and cables
