UJB3T6 DC Transient Protector
- Factory serviceable
- Full six-wire with shield protection
- #6 SEMS screw type; accepts spade lugs, tinned leads or bare wires up to #12 AWG
- Up to eight parallel or summed load cells
- 50K baud maximum transmission frequency
- Up to six serial data lines can be protected instead of load cells
- Protects load cells from voltage transients
- Compatible with signals down to 1 uV grad
- Installations exposed to significant transients
- Protects serial communication lines
- Descripción
Descripción
Protection Type:
6-channel series type with separate shield
Maximum Excitation Voltage:
20 V DC or 20 V AC
Clamping Voltage:
75 V DC or 75 V AC
Clamping Time:
75 V DC Stages <100 nanoseconds typical
Peak Surge Currents:
75 V DC Stage-5000 amperes
Maximum Serial Transmission Rate:
50 k baud
Series resistance:
0.219 ohms typical
Series inductance:
110 µh typical
Grounding:
20 ft (6.1 m) insulated # 10 AWG wire
Cable Fitting:
(2) nylon strain relief for 0.079-0.236 in (2.0-6.0 mm) diameter cable
Enclosure:
Fiberglass-Reinforced Polyester (FRP) NEMA 4X, maximum 40 psi washdown
Operating Temperature:
14°F to 104°F (-10°C to 40°C)
Circuit Board:
6.75 x 4.75 in (171.5 x 120.7 mm) with anti-fungal coating
Dimensions:
7.63 W x 6.63 H x 3.25 in D (193.8 W x 168.3 H x 82.6 mm D)
