JB1010ST Signal Trim
- Stainless steel, NEMA Type 4X enclosure
- Transient protection using gas discharge tubes
- Section and individual cell trim capability
- Compact enclosure only 1.75in deep
- Strain relief cable fitting
- Number of cells: 2, 4, 6, 8 or 10 single load cells
- Any unused channels require modification
Applications
- Tank, truck and railroad scales
- Summing 10 load cells with individual and section trimming capability
- Descripción
Descripción
Specifically for signal trimming, the compact JB1010ST signal trim junction box with transient protection provides individual cell and section trim capability. The JB1010ST junction box totals up to ten single load cells and includes transient protection inside the element-resistant NEMA Type 4X stainless steel enclosure.
Cable Fittings:
11 nylon cable strain relief for cable dimension
range: 0.079 to 0.314
Connectors:
Electrovert 0.197 miniature screw terminals,
5-positions
Maximum wire size: # 14 AWG
External enclosure ground stud
Trimming:
Individual cell and section signal trim
Potentiometers:
100,000 ohms, 25 turns cerment
Enclosure:
Stainless steel
Circuit Board:
6.5 in x 4.5in (165.1 mm x 114.3mm)
Warranty:
One-year limited warranty
| Model | Complete J-Box Replacement | Replacement Board Only | Replacement Cord Grips | Replacement Pressure & Condensation Vent | Desiccant Packs |
|---|---|---|---|---|---|
| JB4SS | 88956 | 88958 | 58983 59001 | 88733 PreVent™ breather (vent) 88734 (vent nut) | 92240 |
| JB4ES | 91779 | 89446 | 58983 59001 | 88733 PreVentbreather (vent) 88734 (vent nut) $1.05 | 92240 |
| JB4SP JB4SPT | 91780 92762 | 88958 (load cell) and 89894 (transient protection) |
58983 59001 | 88733 PreVent breather (vent) 88734 (vent nut) | 16039 |
| JB4EP JB4EPT | 91781 92763 | 89446 (load cell) and 89894 (transient protection) |
58983 59001 | 88733 PreVent breather (vent) 88734 (vent nut) | 16039 |
| EL204 | 73428 | 88958 | N/A | N/A | N/A |
| JB8SP | 91782 | **89889 | 15655 (cord grip) and 15656 (nut)=3/8″ NPT 15628 (cord grip) and 15630 (nut)=1/2″ NPT |
88733 PreVent breather (vent) 88734 (vent nut) | 16039 |
| JB8SPT | 91783 | 89889 (load cell) and 89894 (transient protection) | 15655 (cord grip) and 15656 (nut)=3/8″ NPT 15628 (cord grip) and 15630 (nut)=1/2″ NPT |
88733 PreVent breather (vent) 88734 (vent nut) | 16039 |
| EL304A | 21169 | 21301 | N/A | N/A | N/A |
| JB1010 | 36231 | 36351 | N/A | N/A | N/A |
| JB1010ST | 68813 | 68811 | N/A | N/A | N/A |
| EL210 | 91781, JB4EP* | 92472 | 58983 59001 | N/A | N/A |
| EL211A | 91780, JB4SP (However the board does not have section trim capabilities)* | 92473 (However the board does not have section trim capabilities) | 58983 59001 | N/A | N/A |
| EL604-AL | 88956, JB4SS* | 88958 | 58983 59001 | N/A | N/A |
| EL604STA | 88956, JB4SS* | 88958 | 58983 59001 | N/A | N/A |
| EL604ETA | 91779, JB4ES* | 89446 | 58983 59001 | N/A | N/A |
| EL504 | 21165 | 21296 | N/A | N/A | N/A |
| JB808S | 91782, JB8SP* | 92471 | 15655 (cord grip) and 15656 (nut)=3/8″ NPT 15628 (cord grip) and 15630 (nut)=1/2″ NPT |
N/A | N/A |
| JB818ST | 91783, JB8SPT* | Need (1) 77445 (1) 89889 and (1) 89894 | 15655 (cord grip) and 15656 (nut)=3/8″ NPT 15628 (cord grip) and 15630 (nut)=1/2″ NPT |
N/A | N/A |
OPCIONES
| PART # | PRODUCT DESCRIPTION | LIST PRICE | CART |
|---|---|---|---|
| 77925 | LIT,CDRevolution III Revolution Software, Indicator Manuals |
|
|
| 82505 | Connector,6-Pin Socket FEM, Shielded with Threaded Nut |
|
|
| 93205 | Load Cell Connector with 6 meter Pig Tail Load Cell Cable for 120 Indicator |
|
|
| 103507 | Ind Opt,Load Cell Plug External Disconnect for 120 Indicator, includes locknut & washer |
|
|
| 105914 | LIT,Manual 120 Plus 120 Plus Installation Manual |
|
|
| 107620 | Ind OPT,Digital I/O Card for 120 Plus. |
|
| PART # | PRODUCT DESCRIPTION | LIST PRICE | CART |
|---|---|---|---|
| 165277 | JB1010ST Enclosure Only JB1010ST junction box enclosure with cord grips and cover |
|
