Transducer Simulator 4

• Designed for high accuracy
• Sealed lid with neoprene O-ring
• Dustproof and crush tested to 500 lb
• Four operational modes including vernier adjustment, calibrated adjustment, 0.25 mV/V offset and 0.50 mV/V offset
• Ideal for setpoint or batching simulation

Categorías: ,
  • Descripción


The Transducer Simulator 4 is a fully functional simulator for replicating a wide range of load cell scenarios. An all-in-one carrying case provides the portability and convenience required by field technicians.

Choose any fixed setting ± 0.25 mV or 0.50 mV through a 10-turn wire-wound potentiometer with locking clutch, fixed and variable

Maximum Voltage:
15 V

Less than ± 0.02% full scale

Temperature Coefficient:
Absolute 5 ppm/°C; Tracking less than 0.5 ppm/°C

Load Factors:
Simulates 1, 2, 3, 4 or 8 350-ohm load cells or 2, 4, 6, 8 or 16 700-ohm load cells

+0.25mV/V for use with digitally calibrated meters requiring positive dead load for calibration

Six-way binding posts, suitable for loose wires or banana jacks

One-year limited warranty

Recursos / Descargas

 Transducer Simulator 4  Email
  Transducer Simulator 4 Operating Instructions B  View  Email


22513 Simulator,Scale-Pro 4 Transducer 0-3mV/V W/Vernier Control From -.50mV/V To +3.5mV/V Simulates 1,2,3,4 or 8 Load Cells NEMA 4X


21116 Cable,Interface Simulator I 3


Las piezas de repuesto solo se pueden comprar a través de distribuidores capacitados y autorizados.

Para localizar un distribuidor en su área, llámenos al 997-59665  o complete una solicitud en línea.