TP232 RS-232 Serial Surge Protector

  • Two metal mounting brackets
  • Three stages of protection: Gas discharge tube, series resistor and transient voltage suppressor (TVS)
  • Two terminal posts for ground
  • RS-232 high energy surge protector
  • Terminal blocks for transmit, receive, request to send, clear to send and signal ground
  • Safe for use with computers and PLCs
  • Indicators
  • Remote displays
  • Printers
  • Computers
  • PLC
  • Descripción


The TP232 RS-232 high energy surge protector is safe to use with computers and PLCs. This device offers three stages of protection using different technologies for optimal surge protection.

Clamping Voltage (Stage One):
72 V DC minimum, 108 V DC maximum

Series Resistance (Stage Two):
2.7 Ohms

Clamping Voltage (Stage Three):
14.3 V minimum, 15.7 V maximum

Clamping Time:
Less than 5 x 10-9 seconds

Five position terminal blocks

Approximately 4.5 L x 3.3 W x 1.8 in H (114.3 L x 83.8  W x 45.7 mm H)

Approximately 0.42 lb (0.19 kg)

CE marked

One-year limited warranty

Recursos / Descargas

TP232 RS-232 Serial Surge Protection  Email
TP232 RS232 Surge Protector Installation Guide B  View  Email


89889 Board,8 Channel ST Signal Trim And Section Trim w/Expansion
91782 J-Box,JB8SP 8 Channel Signal Trim with Expansion, FRP Nema 4
165273 Enclosure,JB8SP/SPT Only JB8SP/SPT Junction Box Enclosure W/O Cord Grips and filter. Incl Back plate, cover and gasket.


92734 Assembly,Coupling & Cap Bonded, 1/2 in NPT Grip Cap To 92574 Coupling
Add to Quote
92735 Assembly, Coupling & Cap bonded, 3/8in NPT cap to coupling 92575


Las piezas de repuesto solo se pueden comprar a través de distribuidores capacitados y autorizados.

Para localizar un distribuidor en su área, llámenos al 997-59665  o complete una solicitud en línea.