LCP-1 DC Transient Protector

  • Low cost, non-serviceable
  • Effective series protection for strain gauge transducers
  • Encapsulated circuitry ensures positive protection against fungus or corrosion on boards
  • Two nylon strain reliefs for 0.187 in-0.312 in (4.7 mm-7.9 mm) diameter cable
  • Descripción


The economical LCP-1 DC Transient Protector can be used indoors or outdoors. It provides series protection for strain gauge transducers.

Protection Type:
Four-channel series type with separate shield

Maximum Excitation Voltage:
18 VDC or 18 VAC

Clamping Voltage:
75 VDC or 75 VAC

Clamping Time:
<100 nanoseconds typical

Peak Surge Currents:
5,000 Amps any line to ground and  5,000 Amps excitation to excitation
Maximum Serial Transmission Rate:
30 Kbaud

Through a .25 in (6.35 mm) lug to a 20 ft (6.1 m) insulated #10 AWG ground wire provided

Cable Fitting:
(2) Standard nylon strain relief for 0.187 in-0.312 in (4.7 mm-7.9 mm) diameter cable

Chemically-resistant PVC.  This device, for outdoor or indoor service, is not intended for washdown service (NEMA 4) or for submersion (NEMA 6). Optional NEMA 4X available

Operating Temperature:
14°F to 104°F (-10°C to 40°C) consistent with NTEP guidelines

7,500 MΩ minimum

4.0 W x 4.0 H x 2.50 in D (103.2 W x 103.2 H x 63.5 mm D)

One-year limited

Recursos / Descargas

LCP-1 DC Transient Protection  Email
LCP-1 Load Cell Transient Protection System Technical Card B  View  Email


21143 DC Protection,LCP-1 1/2in NPT Fitting



Las piezas de repuesto solo se pueden comprar a través de distribuidores capacitados y autorizados.

Para localizar un distribuidor en su área, llámenos al 997-59665  o complete una solicitud en línea.