JB4SS TuffSeal™ Signal Trim Junction Box

  • Stainless steel, NEMA Type 4X enclosure
  • Jumpers to enable/disable a load cell
  • PreVent™ breather vent
  • Conformal coated circuit board
  • Number of cells: two, three or four single cells
  • Expansion port
Applications
  • Floor, tank, hopper scales
Categoría:
  • Descripción

Descripción

The JB4SS TuffSeal™ signal trim junction box sums two or four single load cell outputs with the potential to expand and connect other junction boxes. The stainless steel NEMA Type 4X enclosure is proven protection in harsh environments and against abrasive materials. The JB4SS TuffSeal signal trim junction box is ideal for use in tank and hopper scale applications.

Cable Fittings:
P/N 88956:

(4) PG7 0.118-0.255 strain relief
(2) PG11 0.197-0.394 strain relief
(1) PreVent™ breather vent
P/N 107700:
(4) PG9 0.138-0.315 strain relief
(2) PG11 0.197-0.394 strain relief
(1) PreVent™ breather vent

Enclosure:    
Stainless Steel NEMA Type 4X

Connectors:
Spring clamp screwless, 12-28 AWG

Trimming:
Individual cell, signal trim

Potentiometers:
100,000 ohms, 25 turn cermet

Circuit Board:
3.8 in x 2.3 in (96.5 mm x 58.4 mm), with conformal coating

Warranty:
One-year limited warranty

Model Complete J-Box Replacement Replacement Board Only Replacement Cord Grips Replacement Pressure & Condensation Vent Desiccant Packs
JB4SS 88956 88958 58983 59001 88733 PreVent™ breather (vent) 88734 (vent nut) 92240
JB4ES 91779 89446 58983 59001 88733 PreVentbreather (vent) 88734 (vent nut) $1.05 92240
JB4SP JB4SPT 91780 92762 88958 (load cell) and
89894 (transient protection)
58983 59001 88733 PreVent breather (vent) 88734 (vent nut) 16039
JB4EP JB4EPT 91781 92763 89446 (load cell) and
89894 (transient protection)
58983 59001 88733 PreVent breather (vent) 88734 (vent nut) 16039
EL204 73428 88958 N/A N/A N/A
JB8SP 91782 **89889 15655 (cord grip) and 15656 (nut)=3/8″ NPT 15628 (cord grip) and
15630 (nut)=1/2″ NPT
88733 PreVent breather (vent) 88734 (vent nut) 16039
JB8SPT 91783 89889 (load cell) and 89894 (transient protection) 15655 (cord grip) and 15656 (nut)=3/8″ NPT 15628 (cord grip) and
15630 (nut)=1/2″ NPT
88733 PreVent breather (vent) 88734 (vent nut) 16039
EL304A 21169 21301 N/A N/A N/A
JB1010 36231 36351 N/A N/A N/A
JB1010ST 68813 68811 N/A N/A N/A
EL210 91781, JB4EP* 92472 58983 59001 N/A N/A
EL211A 91780, JB4SP (However the board does not have section trim capabilities)* 92473 (However the board does not have section trim capabilities) 58983 59001 N/A N/A
EL604-AL 88956, JB4SS* 88958 58983 59001 N/A N/A
EL604STA 88956, JB4SS* 88958 58983 59001 N/A N/A
EL604ETA 91779, JB4ES* 89446 58983 59001 N/A N/A
EL504 21165 21296 N/A N/A N/A
JB808S 91782, JB8SP* 92471 15655 (cord grip) and
15656 (nut)=3/8″ NPT 15628 (cord grip) and 15630 (nut)=1/2″ NPT
N/A N/A
JB818ST 91783, JB8SPT* Need (1) 77445 (1) 89889 and (1) 89894 15655 (cord grip) and
15656 (nut)=3/8″ NPT 15628 (cord grip) and 15630 (nut)=1/2″ NPT
N/A N/A

Recursos / Descargas

JB4SS TuffSeal Signal Trim Junction Box  Email
JB4ES/JB4SS/JB4EP/JB4SP TuffSeal Installation Guide  View  Email
4 Channel Board – FM Approved Installation Manual C  View  Email

PARTES

88956 J-Box,JB4SS 4 Channel Signal Trim with Expansion, w/PG 7 cord grips for load cells, Stainless Steel Nema 4X FM Approved
Add to Quote
107700 J-Box,JB4SS 4 Channel Signal Trim with Expansion, w/PG9 cord grips for load cells, Stainless Steel Nema 4X FM Approved
Add to Quote
88958 Board,4 Channel ST Signal Trim w/Expansion
Add to Quote
182990 Board Kit,JB4SS w/stndoff Signal Trim W/Expansion.
Add to Quote
165271 Enclosure,JB4SS/ES Only JB4SS/ES Junction Box Enclosure W/Cord Grips & Filter. Includes Cover and Gasket.

OPCIONES

Lo sentimos, no se encontraron opciones para este producto.

PIEZAS DE REPUESTOS

Las piezas de repuesto solo se pueden comprar a través de distribuidores capacitados y autorizados.

Para localizar un distribuidor en su área, llámenos al 997-59665  o complete una solicitud en línea.