Ethernet TCP/IP

  • Supports any serial devices with seven or eight data requiring Ethernet access
  • Compact size for internal installation in 720i™, 820i® and 920i® indicators
  • Can be used in other applications requiring five-volt power supplied
  • 10/100 megabyte through RJ-45 connector or wireless option
  • HTTP, serial, telnet and SNMP management
Categoría:
  • Descripción

Descripción

Supported Protocols:
ARP, UDP, TCP, Telnet, SNMP, ICMP, HTTP, BOOTP, DHCP, and TFTP

Compatibility:
Ethernet: Version 2.0/IEEE 802.3

Network Interface:
Ethernet: RJ-45 (10/100 Base-T) or AUI
(transformer and resistors/capacitors required)

Serial Interface:
1 serial interface

Reset line:
RxD/TxD
RTS/CTS/DCD
DTR line (for disconnect)
Three status lines (for LEDs)

Data Rates:
300 bps to 115.2 Kbps

Serial Line Formats:
Characters: seven or eight data bits
Stop bits: one or two
Parity: odd, even, none

Modem Controls: 
DTR (TTL level)

Flow Control:
XON/XOFF
CTS/RTS
None

Management:
SNMP (read only)
Serial login, Telnet login

Diagnostic LEDs:
TX/RX Data
Good Link
Status
Diagnostics

Power Requirements:
5 V regulated
250 mA (Ethernet model)

Operating Temperature: 
41°F to 122°F (5°C to 50°C)