320IS Plus Intrinsically Safe Digital Weight Indicator

  • LED display, 0.8 in (20 mm), 6-digit, 16-segment
  • Stainless steel NEMA Type 4X/IP66 enclosure
  • T4 temperature rating
  • Front panel digital calibration
  • Automatic zero and span temperature compensation
  • Excitation for four 350 ohms or eight 700 ohms load cells
  • Gross/tare/net computation
  • Tilt stand
  • Numeric keypad
  • Duplex fiber optic interface
  • Power ON/OFF; battery save mode
  • I/O module option: two serial ports, two analog outputs, four digital inputs, four relay contact outputs
  • Eight setpoint (requires I/O module)
  • Factory Mutual (FM entity approved for classes I, II, and III; Divisions 1 and 2; Groups A, B, C, D, E, F, and G
  • Time & Date (requires I/O module)
Categoría:
  • Descripción

Descripción

The Intrinsically Safe Digital Weight Indicator

Designed with the level of safety your location requires, the 320IS Plus digital weight indicator meets hazardous environment requirements without hesitation. With Factory Mutual (FM) entity approval, it is the ideal solution for dangerous and highly explosive environments. Even in dimly-lit areas, the 320IS Plus maintains brilliant visibility for user-friendly operation.

The intrinsically-safe, auto-ranging power supply is designed to meet 320IS Plus entity parameters and safely mount in hazardous areas. With this option, wiring is simplified to a single AC conduit line and seal from the safe area—barrier strips are no longer necessary. When required, an entity approved battery power supply is also available.

For increased functionality, the 320IS Plus includes a full numeric keypad and keyboard tare. The 320IS Plus is also equipped with a standard count mode.

Expand the flexibility of the 320IS Plus with the optional safe area I/O module, featuring two serial ports, two analog outputs, four digital inputs and four relay contact outputs, allowing communication with printers, computers and other peripherals. Both models are equipped with a duplex fiber optic port for electricallyisolated communication with the I/O module.

 

320IS Plus Specifications

 

Load Cell Excitation: 
3.0 VDC at 87.5 Ω
4.6 VDC at 700 Ω

Load Cell Current:   
34 mA (4 x 350 Ω load cells) or (8 x 700 Ω load cells)

Load Cell Cabling:    
4 and 6-wire with remote sensing (recommended)

Analog Signal Input Range:
0.6 mV/V – 4.0 mV/V

Analog Signal Sensitivity:
0.2 µV/graduation minimum 1.5 µV/graduation recommended

Conversion Rate: 
60 updates/second

Resolution:    
10,000 displayed graduations (NTEP), 100,000 expanded
The maximum number of allowed graduations will vary by application

Display Increments:
1, 2, 5

Display:    
Six digits, Light Emitting Diode (LED); 16-segment,
0.8 in (20 mm) digits

Decimal Point:  
Configurable with dead zeros

Unit Switching:
Configurable for two units of measurement with front
panel operation with conversion for tare and setpoint values

Front Panel Control Switches:
Zero, Gross/Net, Tare, Print, Units Conv, Start, Stop, Accum, Tare Display

Front Panel:
24-button flat membrane panel

Front Panel LED Annunciators:
Center Zero, Gross, Net, Motion, lb, kg, oz, g

Motion Band:
Configurable to ±1 or ±3 graduations, 1 second delay (or Off)

Power Input:
5.8 – 7.9 VDC,100 – 175 mA
Maximum power consumption 0.25 watts

Operating Temperature:
14°F to 104°F (-10°C to 40°C) legal

Rating/Material:
Stainless steel NEMA Type 4X/IP66 enclosure

Optional Battery:
Operating Times: 4 x 350 Ω = 35-40 hrs. 1 x 350 Ω = 40-50 hrs.
Charging Times: 10 hours for dead battery, 14 hours for initial charge

Weight:
6.1 lb (2.8 kg)

Warranty:
One-year limited warranty

Approvals:
NTEP pending (TUV, C (UL), FM Entity 03-078) Class III/IIIL 10,000d
Measurement Canada AM-5560