Comunicación Inalámbrica

Comunicaciones inalámbricas

Los transmisores y receptores inalámbricos comunican fácilmente datos entre varios componentes electrónicos en su sistema de balanza.

  • ConnexLink™ Wireless Radio 900 MHZ

    • Durable industrial-grade enclosure with mounting flanges
    • Transmits around corners and through walls
    • Reliable communications up to 115200 kbps
    • Supports point-to-point and point-to-multipoint applications
  • Industrial Broadband Wireless Ethernet

    • Serial and Ethernet connectivity
    • Configures as 802.11 abg access point, wireless bridge, wireless repeater and client
    • Secure WPA2/128 bit encryption
    • Dual band 2.4 GHz or 5 GHz bands
    • Robust design for extreme temperatures (-40˚ to 75˚C) high vibration/shock and hazardous locations (UL Class 1, Division 2, Atex Zone 2)
  • MSI-7000 and 7001 TranSend™ Wireless Load Cell Interface

    • Works with any basic digital weight indicator
    • Excitation to load cell(s) provided by the transmitter, not the indicator
    • Each transmitter/receiver set is individually paired and will not interfere with another set
    • Auto-off mode – selectable for 15, 30, 45, 60 minutes or off
    • Auto-sleep mode – power down during non-use, power up with weight change or key press
    • Serial communication cable included with all transmitters
    • NTEP configurations available
  • MSI-8000 RF Remote Display

    • Handheld RF remote display with 6-digit 1.0 in (26.4 mm) LCD screen
    • Membrane keypad for remote control functionality
    • User definable function keys for added versatility
    • Universal 115/230 VAC, 50/60 Hz battery charger (NA plug standard)
    • Audible alarm
    • Communicates with RF 4260, 7300, 7000 & 7001
  • MSI-8000HD Weight Indicator/RF Remote Display

    • Indicator or RF remote display with six-digit 1.0 in
      (26.4 mm) LCD screen
    • IP68 milled aluminum enclosure
    • Membrane keypad for remote-control functionality
    • User definable function keys for added versatility
    • Compatible with all ScaleCore™-based products including: MSI-7300
      Dyna-Link 2, MSI-3460 Challenger 3, MSI-4260 Port-A-Weigh, MSI-7000 and MSI-7001
    • Swivel tilt stand
  • MSI-9000 CellScale™ Wireless Weighing Solution

    • 2.4 GHz frequency hopping spread spectrum
    • Two scale inputs and excitation with remote sensing (see accessories formating connector)
    • Power/switch cable, 13 ft (4 m) for 9-30 VDC input with two programmable switch inputs
    • RS-232, RS-422 and RS-485 I/O with 13 ft (4 m) interface cable
    • Three internal solid state relays for set-point control
    • Real time clock
    • NEMA Type 4, IP65 enclosure (NEMA Type 6, IP67 with long range antenna)
  • MSI-9002 Breakout Summing Box

    • 4 precision metal film summing resistors with 15 turn pots
    • All inputs transient protected and EMI filtered
    • Each input can be switched in or out
    • Screwless terminals for all wires. Accommodates AWG 16 to 24 wire
    • Designed for AC or DC excitation
    • Uses signal trim summing
    • Rugged milled aluminum, O-ring gasketed, NEMA 4, IP65 (NEMA 6, IP67 with optional connectors by special order)
    • 8 waterproof feedthroughs for load cell cabling and 1 large feedthrough for output to CellScale
    • Comes with 3 m (10 ft) interface cable to the CellScale. Longer cables available by special order
    • User supplies all other cables (usually part of the load cell or scale)
    • Feedthrough connectors accommodate round cables with diameters from 4 mm (0.16 in) to 8 mm (0.31 in)
  • MSI-9008 Multiplexer

    • New generation analog switches
    • All inputs transient protected and EMI filtered
    • Excitation switched for reduced power consumption and increased load cell count
    • Screwless terminals for all wires. Accomodates AWG 16 to 24 wire
    • Designed for AC or DC excitation
    • The Mux channel is controlled by a three bit signal from the CellScale
    • Rugged milled aluminum, O-ring gasketed, NEMA 4, IP65 (NEMA 6, IP67 with optional connectors by special order)
    • 8 waterproof feedthroughs for load cell cabling and 1 large feedthrough for output to CellScale
    • Comes with 3m (10 ft) interface cable to CellScale. Longer cables available by special order
    • User supplies all other cables (usually part of the load cell or scale). Feedthrough connectors accomodate round cables with diameters from 4 mm (0.16 in) to 8 mm (.31 in)
  • MSI-9020 CellModem

    • Modem only component; provides serial interface with computers, printers and scoreboards to a CellScale network
    • 2.4 GHz spread spectrum frequency hopping
    • Power cable, 13 ft (4 m) for 9-30 VDC input
    • One communication port; RS-232 or RS-422, 13 ft (4 m) interface cable
    • NEMA Type 4, IP65 enclosure (NEMA Type 6, IP67 with long range antenna)
  • MSI-9750A CellScale™ RF Portable Indicator

    • Compatible with MSI-6260CS, MSI-9300 and MSI-9000 CellScale
    • 1.4 in x 2.6 in (36 mm x 67 mm), eight line, 21 character LCD display
    • 2.4 GHz spread spectrum transceiver
    • Power supply: 6 cell NiMH fast charge (charges battery pack in two hours or less)
    • RS-232 data I/O
    • Real time clock
    • NEMA Type 3, IP55 enclosure
    • AC adapter/battery charger; 90-264 VAC, 47-63 Hz (NA plug standard)
  • MSI-9850 CellScale™ RF Digital Weight Indicator

    • Compatible with MSI-6260CS, MSI-9300 and MSI-9000 CellScale
    • 6-digit 1.2 in (30 mm) LED display
    • 1.4 in x 2.6 in (36 x 67 mm) information LCD display
    • 2.4 GHz spread spectrum transceiver
    • RS-232 data I/O with real time clock
    • NEMA Type 4, IP65 enclosure
    • Power input 85-265 VAC, 47-440 Hz / 130-300 VDC; 8 ft/2.4 m power cable included (NA plug standard)
  • SendIt™ Wireless Load Cell Interface

    • Works with any basic digital weight indicator
    • Excitation to load cell(s) provided by the transmitter, not the indicator
    • Each transmitter/receiver set is individually paired and will not interfere with another set
    • Auto-off mode: Selectable for 15, 30, 45, 60 minutes or off
    • Auto-sleep mode: Power down during non-use, power up with weight change or key press
    • RS-232 cable included with transmitter and paired set
0
Conectando
Espere por favor...
Envía un mensaje

No estamos en línea, pero déjanos un mensaje y responderemos en breve.

Nombre
* Correo Electrónico
* Ingresa tu mensaje.
Ingresa tus Datos

Necesitas ayudas? Consulta tus dudas por este medio.

Nombre
* Correo Electrónico
* Ingresa tu consulta
Chat en Línea!
Califíca al Operador

¡Ayúdanos a ayudarte mejor! No dude en dejarnos cualquier comentario adicional.

¿Que te pareció la atención?